SOP for Preventive Maintenance of Compactor EN-35

The objective of this Standard Operating Procedure of preventive maintenance of compactor is to outline the steps and guidelines for conducting preventive maintenance on a compactor to ensure its optimal performance, safety, and longevity.Preventive Maintenance of Compactor

SOP for Preventive Maintenance of Compactor

  • OBJECTIVE:
    • To lay down the Procedure for preventive maintenance of Compactor installed in QA/Warehouse area.
  • SCOPE:
    • This SOP is applicable to preventive maintenance of pumps installed in QA/Warehouse area.
  • RESPONSIBILITY:
    • Technician/ Operator shall be responsible for proper execution of preventive maintenance as per SOP.
    • Engineering – Head shall be responsible for reviewing the SOP and for ensuring proper execution of preventive maintenance
  • ACCOUNTABILITY:
    • Engineering – Head shall be accountable for proper implementation of the SOP.
  • DEFINITIONS:
    • Nil
  • PROCEDURE:
    • Preventive maintenance shall be executed as per the SOP No.: SOP/EN/XXXYYY – Execution of Preventive Maintenance.
    • Ensure that the spare parts are available at the time of preventive maintenance.
  • Preventive Maintenance
    • Check the door handle for smooth operation and locked.
    • Check the railing for any damage.
    • Lubricate railing if required.
    • Check the wheel condition for smooth operation. Replace if required.
    • Lubricate the Chain and sprockets.
    • Checking shall be done half yearly ±15 days.
  • Post Preventive Maintenance – Check List in preventive maintenance of Compactor.
    • Whenever any modifications and major works are carried out to the equipment, the same shall be mentioned in the equipment history card as per the respective SOP.
    • Ensure that the equipment is running smoothly, without any abnormality.
    • If any abnormality is observed in the above, same will be attended in co-ordination with User department Head.
    • Record  the preventive maintenance activity as per  the  format  No  : SOP/EN/XXXYYY  Preventive   maintenance   check  list  & record.
FMEA 00
  • ABBREVIATIONS
    • CRF No.   :     Change Request Form number
    • QA            :     Quality Assurance
    • PM            :     Preventive Maintenance
    • EN           :    Engineering
  • REFERENCES
    • Nil.  
  • DISTRIBUTION LIST
    • SOP shall be distributed to following departments Quality Assurance, Engineering as per user request.
  • ANNEXURES
    • Preventive Maintenance Checklist & Record for Compactor            :    SOP/EN/XXXYYY

PREVENTIVE MAINTENANCE CHECKLIST & RECORD FOR COMPACTOR

Equipment Name Location 
Equipment ID Frequency 
Things to be done:Check ListRemarks
     Half Yearly Check List  
1.  Check the door handle for smooth operation and locked  
2.  Check the railing for any damage.  
3.  Lubricate railing if required.  
4.  Check the wheel condition for smooth operation. Replace if required.  
5.  Lubricate the Chain and sprockets.  
PQS

You may also read about Good Laboratory Practices (GLP)

Leave a Comment