MCQ Of Microbiology Safety Guidelines

Results

HD Quiz powered by harmonic design

#1. What is the primary purpose of using a biological safety cabinet (BSC) in microbiology labs?

A) To store chemicals safely

B) To prevent contamination of samples and protect the user from pathogens

C) To maintain a sterile environment for chemical reactions

D) To dispose of hazardous waste

#2. Which of the following is a standard practice before leaving the microbiology laboratory?

A) Removing and properly disposing of gloves

B) Taking samples home for further analysis

C) Turning off all lights and electrical equipment

D) Spraying disinfectant on all surfaces

#3. What should be done immediately if a culture spill occurs in the lab?

A) Leave the area and inform a supervisor

B) Cover the spill with a disinfectant-soaked paper towel and let it sit for the recommended contact time

C) Continue with the experiment and clean up later

D) Wash hands thoroughly and leave the lab

#4. Which Personal Protective Equipment (PPE) is essential when working with pathogenic microorganisms?

A) Safety goggles

B) Lab coat

C) Gloves

D) All of the above

#5. How should biohazardous waste be disposed of in a microbiology lab?

A) In the regular trash can

B) By flushing down the sink

C) In designated biohazard bags and containers

D) By incineration without any prior containment

#6. What is the recommended handwashing duration to ensure proper hygiene in a microbiology lab?

A) 5 seconds

B) 10 seconds

C) 20 seconds

D) 2 minutes

#7. What is the correct procedure for sterilizing an inoculating loop?

A) Wipe it with alcohol

B) Heat it in a flame until red-hot

C) Rinse it with water

D) Autoclave it for 10 minutes

#8. In case of exposure to a biohazardous agent, what is the first step to be taken?

A) Report to the supervisor immediately

B) Continue working to finish the task

C) Leave the laboratory quietly

D) Drink plenty of water

#9. What is the purpose of using an autoclave in a microbiology lab?

A) To dry lab equipment

B) To sterilize lab equipment and media

C) To refrigerate samples

D) To measure chemical concentrations

#10. Which of the following practices is NOT recommended in a microbiology lab?

A) Eating and drinking

B) Labeling all cultures and reagents clearly

C) Disinfecting work surfaces before and after experiments

D) Using proper aseptic techniques

#11. What is the correct action to take if a microbiologist accidentally breaks a glass container containing a bacterial culture?

A) Sweep up the broken glass immediately and dispose of it in the regular trashX

B) Notify others in the lab, use appropriate PPE, cover the area with paper towels soaked in disinfectant, and then carefully clean up the glass and culture

C) Ignore the spill and continue working

D) Use a vacuum cleaner to clean up the broken glass and spilled culture

#12. What type of fire extinguisher should be used for a fire involving flammable liquids in the microbiology lab?

A) Class

A B) Class B

C) Class C

D) Class D

#13. Which of the following is the most effective method for decontaminating surfaces contaminated with bacterial spores?

A) Ethanol

B) Bleach

C) Soap and water

D) UV light

#14. What is the primary purpose of an eyewash station in a microbiology lab?

A) To clean laboratory equipment

B) To wash out eyes in case of exposure to hazardous chemicals or biological agents

C) To provide drinking water

D) To sterilize contact lense

#15. Which biosafety level (BSL) requires the use of a full-body, air-supplied, positive-pressure suit?

A) BSL-1

B) BSL-2

C) BSL-3

D) BSL-4

#16. When should gloves be changed in a microbiology lab?

A) After completing a single task

B) When they become visibly contaminated

C) Before leaving the lab area

D) All of the above

#17. What is the main reason for tying back long hair in the microbiology lab?

A) To comply with fashion standards

B) To prevent hair from getting contaminated or caught in equipment

C) To keep hair clean

D) To improve visibility

#18. Which type of waste should be autoclaved before disposal?

A) Regular trash

B) Chemical waste

C) Biohazardous waste

D) Recyclable material

#19. What should be done if a lab worker develops symptoms of an illness after working with infectious agents?

A) Self-medicate and continue working

B) Inform the lab supervisor and seek medical evaluation

C) Take a day off without informing anyone

D) Ignore the symptoms and hope they resolve

#20. What is the appropriate action if an autoclave cycle fails to reach the required temperature and pressure?

A) Restart the cycle immediately

B) Report the failure and do not use the autoclave until it is repaired

C) Ignore and continue using the autoclave

D) Attempt to fix the autoclave without any training

#21. In the event of a small fire in the lab, what should be your first response?

A) Use the nearest fire extinguisher to put out the fire

B) Evacuate the lab and pull the fire alarm

C) Pour water on the fire

D) Continue working and ignore the fire

Finish

Results

#1. What is the primary purpose of using a biological safety cabinet (BSC) in microbiology labs?

#2. Which of the following is a standard practice before leaving the microbiology laboratory?

#3. What should be done immediately if a culture spill occurs in the lab?

#4. Which Personal Protective Equipment (PPE) is essential when working with pathogenic microorganisms?

#5. How should biohazardous waste be disposed of in a microbiology lab?

#6. What is the recommended handwashing duration to ensure proper hygiene in a microbiology lab?

#7. What is the correct procedure for sterilizing an inoculating loop?

#8. In case of exposure to a biohazardous agent, what is the first step to be taken?

#9. What is the purpose of using an autoclave in a microbiology lab?

#10. Which of the following practices is NOT recommended in a microbiology lab?

#11. What is the correct action to take if a microbiologist accidentally breaks a glass container containing a bacterial culture?

#12. What type of fire extinguisher should be used for a fire involving flammable liquids in the microbiology lab?

#13. Which of the following is the most effective method for decontaminating surfaces contaminated with bacterial spores?

#14. What is the primary purpose of an eyewash station in a microbiology lab?

#15. Which biosafety level (BSL) requires the use of a full-body, air-supplied, positive-pressure suit?

#16. When should gloves be changed in a microbiology lab?

#17. What is the main reason for tying back long hair in the microbiology lab?

#18. Which type of waste should be autoclaved before disposal?

#19. What should be done if a lab worker develops symptoms of an illness after working with infectious agents?

#20. What is the appropriate action if an autoclave cycle fails to reach the required temperature and pressure?

#21. In the event of a small fire in the lab, what should be your first response?

Leave a Comment Cancel reply

Results

#1. What is the primary purpose of using a biological safety cabinet (BSC) in microbiology labs?

#2. Which of the following is a standard practice before leaving the microbiology laboratory?

#3. What should be done immediately if a culture spill occurs in the lab?

#4. Which Personal Protective Equipment (PPE) is essential when working with pathogenic microorganisms?

#5. How should biohazardous waste be disposed of in a microbiology lab?

#6. What is the recommended handwashing duration to ensure proper hygiene in a microbiology lab?

#7. What is the correct procedure for sterilizing an inoculating loop?

#8. In case of exposure to a biohazardous agent, what is the first step to be taken?

#9. What is the purpose of using an autoclave in a microbiology lab?

#10. Which of the following practices is NOT recommended in a microbiology lab?

#11. What is the correct action to take if a microbiologist accidentally breaks a glass container containing a bacterial culture?

#12. What type of fire extinguisher should be used for a fire involving flammable liquids in the microbiology lab?

#13. Which of the following is the most effective method for decontaminating surfaces contaminated with bacterial spores?

#14. What is the primary purpose of an eyewash station in a microbiology lab?

#15. Which biosafety level (BSL) requires the use of a full-body, air-supplied, positive-pressure suit?

#16. When should gloves be changed in a microbiology lab?

#17. What is the main reason for tying back long hair in the microbiology lab?

#18. Which type of waste should be autoclaved before disposal?

#19. What should be done if a lab worker develops symptoms of an illness after working with infectious agents?

#20. What is the appropriate action if an autoclave cycle fails to reach the required temperature and pressure?

#21. In the event of a small fire in the lab, what should be your first response?

Related posts:

Leave a Comment Cancel reply